Wolverine V4 Pro
Current Xbox/PC family: record fitted rear buttons, trigger actuation and Synapse profile. Browser sampling cannot verify an 8K specification.
CONNECTION & TESTING GUIDE
Razer controller tester
Check Razer Wolverine and Raiju inputs, with guidance for platform modes, trigger stops and remapped rear controls.
Connect with USB or Bluetooth, focus this page and press a controller button.
Choose a model reference (optional)
Your selection is recorded separately from the browser’s device identity.
Choose a model for setup notes. This does not change your inputs or identify hardware automatically.
Press any controller button to begin
Layout illustration only. The button grid shows the actual inputs received.
L2 / LT
R2 / RT
Resting-stick measurement
This describes the input exposed by your browser. Firmware and remapping software can already apply deadzones. These readings do not certify hardware condition.
Raw readings & input history
Indices are shown as reported by the browser. Unknown layouts are not assigned stick or trigger names.
Waiting for controller input.
GUIDED CHECKUP
Check every control.
- Buttons
- Triggers
- Stick drift
- Stick range
- Results
Connect a controller to begin.
Saved snapshots & comparison 0
Saved only when you choose, in this browser. Compare readings taken under the same conditions.
Connect your Razer controller
Choose the exact product before connecting: Wolverine V4 and Xbox-compatible V3 models differ from Raiju models for PlayStation and PC. Wolverine V3 Pro 8K PC is a separate PC-specific product.
For a first PC test, use the model’s supported USB data connection or its supplied wireless receiver. On Raiju V3 Pro, select PC mode for a Windows session. The browser can identify that XInput connection as an Xbox controller.
- Confirm the controller’s platform mode and supported connection. Use a USB data cable or the receiver specified for that exact model.
- Focus this page, press a face button and choose the responding device from the connected-controller menu.
- Press and release each control. Check raw indices if the device has no standard mapping.
- Record your connection, software profile and trigger-stop setting before saving a snapshot.
MODEL NOTES
Choose your Razer
Wolverine V4 Tournament Edition
Wired member of the V4 range. Use its own setup instructions and record trigger and rear-control assignments.
Wolverine V3 Pro
Use its supported PC USB or wireless receiver connection. Note trigger-stop and rear-paddle assignments.
Wolverine V3 Tournament Edition
This is the wired member of the V3 range. Check the USB data connection before troubleshooting browser detection.
Wolverine V3 Pro 8K PC
Treat this as the PC-specific model. Browser sample timing cannot validate the advertised polling rate.
Raiju V3 Pro
Select PC mode for Windows. An Xbox-style XInput identity is expected and does not mean the wrong controller was detected.
Raiju / Raiju Ultimate / Tournament Edition
Legacy family reference: check the model-specific support manual for its PC connection and driver requirements.
Why a Razer trigger or rear button can look different
A trigger-stop or instant-trigger setting changes the physical travel and may change the reported response. Record its position and compare both trigger readings under the same setting before treating a quick jump to full input as a fault.
Extra bumpers and rear paddles can be assigned to other controls through the model’s configuration software. Test the original control, then the assigned rear control. If both highlight the same button index, you are observing the mapping delivered to the browser.
A manufacturer’s polling-rate specification is not measured by the animation on this page. This tester records browser input snapshots; it does not verify an 8K mode, wireless latency or console-specific haptics.
Turn a reading into a useful comparison
Check one variable at a time. For unwanted stick movement, release the sticks onto a stable surface and run the ten-second resting test. For a missing action, compare a direct button press with its rear-button assignment. Save a note identifying the active profile so a later result can be reproduced.
The browser-reported device name can describe a virtual gamepad. The optional model reference is your selection, not automatic hardware identification. Brand listing does not guarantee vibration, independent paddles or vendor-specific controls in your browser.
Manufacturer references
- Wolverine V4 range announcement
- Razer controller range
- Wolverine V3 Pro support
- Raiju V3 Pro support
- Wolverine V3 Pro 8K PC support
Documentation reviewed 29 October 2026. Setup guidance, not a hands-on product review or a certification of browser support.