G7 Pro
Distinguish PC wireless use from the supported Xbox connection. Record trigger-stop and software profile settings.
CONNECTION & TESTING GUIDE
GameSir controller tester
Test GameSir G7, Kaleid, Cyclone and Nova families, with connection and profile checks for the model you actually own.
Connect with USB or Bluetooth, focus this page and press a controller button.
Search the model list or leave it automatic.
Choose your model for setup notes and suggested naming. The connected device above is reported separately by your browser.
Model setup guide →Press buttons, squeeze triggers and move both sticks. Save a baseline before changing settings.
Press any controller button to begin
The diagram shows browser controls, not an exact product photograph. Extra controls may share an existing input.
L2 / LT
R2 / RT
Resting-stick measurement
This describes the input exposed by your browser. Firmware and remapping software can already apply deadzones. These readings do not certify hardware condition.
Raw readings & input history
Indices are shown as reported by the browser. Unknown layouts are not assigned stick or trigger names.
Waiting for controller input.
GUIDED CHECKUP
Check every control.
Step 1 of 5
- Buttons
- Triggers
- Stick drift
- Stick range
- Results
Connect a controller to begin.
KEEP YOUR BASELINE
Save or export this session
Snapshots stay in this browser. Export a report before clearing site data or moving to another device.
Saved snapshots & comparison 0
Choose two records to compare. Imported files are checked locally and never uploaded.
Connect your GameSir controller
GameSir sells Xbox-licensed controllers, PC gamepads and mobile products. A GameSir logo alone does not imply Xbox console support. Use the exact product’s supported PC connection for a browser test.
For wired G7 SE, G7 HE and Kaleid-family controllers, check that the USB plug is fully seated and carries data. For models with multiple connections, distinguish the supplied PC receiver from a Bluetooth mode intended for another platform.
- Confirm the controller’s platform mode and supported connection. Use a USB data cable or the receiver specified for that exact model.
- Focus this page, press a face button and choose the responding device from the connected-controller menu.
- Press and release each control. Check raw indices if the device has no standard mapping.
- Record your connection, software profile and trigger-stop setting before saving a snapshot.
MODEL NOTES
Choose your GameSir
G7 SE
Check the wired USB data connection and active Nexus settings before measuring resting-stick movement.
G7 HE
Check cable seating and profile settings. Treat this as a distinct model from G7 SE when following setup instructions.
Kaleid / Kaleid Flux
Use the correct wired model and configuration instructions. Note remapped rear buttons before testing them.
Cyclone 2
Select the correct PC connection and profile. Record whether motion or trigger mode changes the exposed values.
SuperNova / Nova Lite
Use the exact model’s supported connection mode; Nova-family products do not share every platform feature.
Nova Lite 2 / Nova 2 Lite
Check hair-trigger and turbo settings if a trigger jumps or a button repeats. GameSir support also uses the Nova 2 Lite name.
Check the selected mode and configuration app
GameSir software differs by product. Follow the downloads page for your model instead of assuming every controller uses Nexus. Record any stick deadzone, trigger response, remapping or motion-to-stick options that are active.
For G7 Pro, the documented connection can differ by platform; do not infer wireless Xbox compatibility from PC wireless support. A browser test also cannot prove a gyro, audio or console-specific feature works in a game.
If detection changes after reconnecting, first confirm the same controller mode and device entry are selected. Keep calibration and factory-reset procedures as model-specific manufacturer steps, rather than treating a reset as necessary for every missing browser reading.
Turn a reading into a useful comparison
Check one variable at a time. For unwanted stick movement, release the sticks onto a stable surface and run the ten-second resting test. For a missing action, compare a direct button press with its rear-button assignment. Save a note identifying the active profile so a later result can be reproduced.
The browser-reported device name can describe a virtual gamepad. The optional model reference is your selection, not automatic hardware identification. Brand listing does not guarantee vibration, independent paddles or vendor-specific controls in your browser.
Manufacturer references
- GameSir FAQ
- GameSir downloads
- GameSir controller families
- Nova Lite 2 specifications
- Nova 2 Lite support FAQ
Documentation reviewed 29 October 2026. Setup guidance, not a hands-on product review or a certification of browser support.