Skip to content
ControllerTesterControllerTesterTest controller

CONNECTION & TESTING GUIDE

PowerA controller tester

Test PowerA FUSION and OPS controllers and check the correct configuration software for each family.

Live controller test

Waiting for a controller

Connect with USB or Bluetooth, focus this page and press a controller button.

Search the model list or leave it automatic.

Choose your model for setup notes and suggested naming. The connected device above is reported separately by your browser.

Model setup guide →
Press buttons, squeeze triggers and move both sticks. Save a baseline before changing settings.
Press any controller button to begin

The diagram shows browser controls, not an exact product photograph. Extra controls may share an existing input.

L2 / LT—
R2 / RT—
Buttons detectedWaiting for input
Vibration options

Connect a controller to check browser rumble support.

Raw readings & input history

Indices are shown as reported by the browser. Unknown layouts are not assigned stick or trigger names.

Waiting for controller input.

    KEEP YOUR BASELINE

    Save or export this session

    Snapshots stay in this browser. Export a report before clearing site data or moving to another device.

    Saved snapshots & comparison 0

    Choose two records to compare. Imported files are checked locally and never uploaded.

    Connect your PowerA controller

    PowerA Xbox and PC/Cloud controllers have different platform and software requirements. Start with the exact FUSION or OPS model and a supported computer connection.

    FUSION Pro 4 is a wired Xbox/PC controller. OPS v3 is a separate PC/Cloud family with its own PC HQ software; do not assume the Xbox-oriented Gamer HQ setup applies to both.

    1. Confirm the controller’s platform mode and supported connection. Use a USB data cable or the receiver specified for that exact model.
    2. Focus this page, press a face button and choose the responding device from the connected-controller menu.
    3. Press and release each control. Check raw indices if the device has no standard mapping.
    4. Record your connection, software profile and trigger-stop setting before saving a snapshot.

    MODEL NOTES

    Choose your PowerA

    Record remapping and trigger settings

    A rear button assigned to A, B or a trigger can highlight that existing browser control. Check the direct button and rear assignment separately, then keep the profile name in your report.

    Deadzones, trigger stops and response settings can affect the values delivered to the browser. A comparison is most useful when the connection and profile are held constant.

    Lighting and headset functions are outside the Gamepad API button/stick test. An input result does not verify those features or the compatibility of a different platform edition.

    Turn a reading into a useful comparison

    Check one variable at a time. For unwanted stick movement, release the sticks onto a stable surface and run the ten-second resting test. For a missing action, compare a direct button press with its rear-button assignment. Save a note identifying the active profile so a later result can be reproduced.

    The browser-reported device name can describe a virtual gamepad. The optional model reference is your selection, not automatic hardware identification. Brand listing does not guarantee vibration, independent paddles or vendor-specific controls in your browser.

    Buttons & triggers → Resting stick test → Connection help →

    Manufacturer references

    Documentation reviewed 29 October 2026. Setup guidance, not a hands-on product review or a certification of browser support.