Recon Controller
Use wired USB for Xbox/Windows. Audio controls are outside the browser gamepad test.
CONNECTION & TESTING GUIDE
Turtle Beach controller tester
Check Recon and Stealth Ultra inputs, with notes for rear assignments, profile settings and features outside a browser test.
Connect with USB or Bluetooth, focus this page and press a controller button.
Search the model list or leave it automatic.
Choose your model for setup notes and suggested naming. The connected device above is reported separately by your browser.
Model setup guide →Press buttons, squeeze triggers and move both sticks. Save a baseline before changing settings.
Press any controller button to begin
The diagram shows browser controls, not an exact product photograph. Extra controls may share an existing input.
L2 / LT
R2 / RT
Resting-stick measurement
This describes the input exposed by your browser. Firmware and remapping software can already apply deadzones. These readings do not certify hardware condition.
Raw readings & input history
Indices are shown as reported by the browser. Unknown layouts are not assigned stick or trigger names.
Waiting for controller input.
GUIDED CHECKUP
Check every control.
Step 1 of 5
- Buttons
- Triggers
- Stick drift
- Stick range
- Results
Connect a controller to begin.
KEEP YOUR BASELINE
Save or export this session
Snapshots stay in this browser. Export a report before clearing site data or moving to another device.
Saved snapshots & comparison 0
Choose two records to compare. Imported files are checked locally and never uploaded.
Connect your Turtle Beach controller
Recon is a wired Xbox/Windows controller. Stealth Ultra is a different family with its own connection and configuration options; use the correct manual for Ultra or Ultra II.
Start with a supported USB or receiver connection and record your profile. Audio controls and built-in controller display functions are separate from the browser’s gamepad input stream.
- Confirm the controller’s platform mode and supported connection. Use a USB data cable or the receiver specified for that exact model.
- Focus this page, press a face button and choose the responding device from the connected-controller menu.
- Press and release each control. Check raw indices if the device has no standard mapping.
- Record your connection, software profile and trigger-stop setting before saving a snapshot.
MODEL NOTES
Choose your Turtle Beach
Stealth Ultra
Record the controller profile and rear assignments before comparing stick and trigger readings.
Stealth Ultra II
Record stick gate-shape and response settings; these can change the outline observed in a range test.
Why settings matter for a stick comparison
Stealth Ultra II includes configurable stick response and gate-shape options. A circular or more square trace can reflect that configuration. The tester’s geometric range display does not award a universal accuracy score.
Rear assignments may duplicate existing controls. Test a direct input and its assigned rear control separately; a matching button index can be expected.
Headset sound, microphone monitoring and controller audio features are not measured here. Use the manufacturer’s audio troubleshooting instructions for an audio-only symptom even if all gamepad inputs work.
Turn a reading into a useful comparison
Check one variable at a time. For unwanted stick movement, release the sticks onto a stable surface and run the ten-second resting test. For a missing action, compare a direct button press with its rear-button assignment. Save a note identifying the active profile so a later result can be reproduced.
The browser-reported device name can describe a virtual gamepad. The optional model reference is your selection, not automatic hardware identification. Brand listing does not guarantee vibration, independent paddles or vendor-specific controls in your browser.
Manufacturer references
Documentation reviewed 29 October 2026. Setup guidance, not a hands-on product review or a certification of browser support.