Skip to content
ControllerTesterControllerTesterTest controller

CONNECTION & TESTING GUIDE

GuliKit controller tester

Test GuliKit KK controllers and distinguish a trigger mode or saved setting from unexpected hardware behaviour.

Live controller test

Waiting for a controller

Connect with USB or Bluetooth, focus this page and press a controller button.

Search the model list or leave it automatic.

Choose your model for setup notes and suggested naming. The connected device above is reported separately by your browser.

Model setup guide →
Press buttons, squeeze triggers and move both sticks. Save a baseline before changing settings.
Press any controller button to begin

The diagram shows browser controls, not an exact product photograph. Extra controls may share an existing input.

L2 / LT—
R2 / RT—
Buttons detectedWaiting for input
Vibration options

Connect a controller to check browser rumble support.

Raw readings & input history

Indices are shown as reported by the browser. Unknown layouts are not assigned stick or trigger names.

Waiting for controller input.

    KEEP YOUR BASELINE

    Save or export this session

    Snapshots stay in this browser. Export a report before clearing site data or moving to another device.

    Saved snapshots & comparison 0

    Choose two records to compare. Imported files are checked locally and never uploaded.

    Connect your GuliKit controller

    Choose the PC input mode supported by the exact KK model. GuliKit’s configuration tool documents supported models and a PC XInput connection for configuration.

    A multi-platform controller can expose different layouts in different modes. Record the selected mode and connection before comparing the browser values.

    1. Confirm the controller’s platform mode and supported connection. Use a USB data cable or the receiver specified for that exact model.
    2. Focus this page, press a face button and choose the responding device from the connected-controller menu.
    3. Press and release each control. Check raw indices if the device has no standard mapping.
    4. Record your connection, software profile and trigger-stop setting before saving a snapshot.

    MODEL NOTES

    Choose your GuliKit

    GuliKit

    KK3 Max

    Check analog/digital trigger-switch positions before judging whether intermediate trigger values should appear.

    Open tester & setup guide ↗

    Analog and digital trigger modes

    KK3 Max provides an analog/digital trigger switch. Digital mode can jump from released to pressed with little or no intermediate value; that is different from a long analog sweep.

    Sensor technology does not remove the need to check calibration, firmware and profile settings. A zero centre reading may include filtering before the input reaches the browser.

    Keep rear assignments, trigger mode and stick settings in your setup note. Use the manufacturer’s exact-model calibration instructions if needed; this website does not write calibration to the controller.

    Turn a reading into a useful comparison

    Check one variable at a time. For unwanted stick movement, release the sticks onto a stable surface and run the ten-second resting test. For a missing action, compare a direct button press with its rear-button assignment. Save a note identifying the active profile so a later result can be reproduced.

    The browser-reported device name can describe a virtual gamepad. The optional model reference is your selection, not automatic hardware identification. Brand listing does not guarantee vibration, independent paddles or vendor-specific controls in your browser.

    Buttons & triggers → Resting stick test → Connection help →

    Manufacturer references

    Documentation reviewed 29 October 2026. Setup guidance, not a hands-on product review or a certification of browser support.